Acces control evaluation kit serie 6400
|
Acces Control Serie 6400 is a system of complete test for the acces controle on frequency 13.56 MHz
contactless The kit allows the features read / write via serial RS-485. Delivered with test badges
Contents:
1 - S6410 Wall Plate Reader
1 - S6420 Mullion Reader
1 - Universal Power Supply
1 - RS-485 to RS-232 Converter Harness
1 - Single Ended Harness
1 - Serial Data Cable
1 - Mounting Hardware Pack
1 - Software Demo CD
1 - Getting Started Guide
1 - 13.56 MHz Vicinity Badges |
Acces evaluation kit
|
This Axcess Evaluation Kit is perfect for seeing the capabilities of the Axcess Active ID System.
This kit comes complete with the following items:
- (1) Activator, Standard
- (1) Receiver, Standard
- (1) Antenna, Thin Flexible
- (1) ActiveTrac Software
- (1) Tag, LED Diagnostic
- (1) Evaluation Cable Kit
- (4) Tag, Asset Basic
- (3) Tag, Personnel ID Basic
|
Evaluation kit doubles frequency HF - LF
|
Allows test of the TAG high frequency ( 13.56 MHz) and Low Frequency (134 kHz)
The kit is normally delivered with an outfit of tags for the tests, the supply and the software under (ready-to-use) Windows.
Allows writing and reading of tags hexadecimal and ASCII.
|
Tags list |
| |
|
|
|
|
LF 32mm Glass R/W
6,30cm Horizontal / 11,40cm Vertical
|
LF Keyring R/O
3,80 à 5,20 cm
|
LF Credit Card R/O
20 cm
|
LF 85mm Large Disk R/W
26,70cm
|
|
High frequencies (13.56 MHz) |
|
|
|
|
|
|
HF Access Control Card with 45mm X 76mm ISO inlay
10 à 12 cm
|
HF 22.5mm X 38mm ISO inlay
6,35cm
|
HF 45mm X 45mm ISO inlay
7,60cm
|
HF 45mm X 76mm ISO inlay
11,43cm
|
|
|
|
|
|
HF 55mm X 55mm Poly Label with 45mm X 45mm ISO inlay
12,70cm
|
HF Imprinted Yellow SmartBand with 22.3mm x 38mm ISO inlay
6,30cm
|
HF Encapsulated "Laundry Tag" Transponder
7,70cm
|
HF PVC Card, Clear Back with TAG-IT inlay (non-ISO)
10cm
|
|
Evaluation kit HF
|
Evaluation kit 6000 Series HF-I Mid-Range
For tags reading according to 13.56 MHZ and compatible ISO 15693
Standards: EC and FF( Reading MAP multi 6350)
Contents :
1 - Housed S6350 Midrange Reader RI-STU-TRDC with integrated RS232 Interface Board and Antenna
1 - 9-Pin Sub-D Cable (male - female connector)
1 - Tag-it™ Transponder Variety Pack
1 - CD with User Documentation and Demo Software
1 - Getting Started Guide
1 - 9V Power Supply Input 100V - 240V, 1.5A with various main power connectors for international use |
Evaluation kit LF
|
Evaluation Kit RFID Serie 2000 Low Frequency
Contains a typical reader Serie on 2000, antenna, outfit of transponders and software
Contents :
- 32mm Glass Transponder SAMPT (RI-TRP-IR2B)
- 32mm Glass Transponder R/W (RI-TRP-WR2B)
- 23mm Glass Transponder R/W (RI-TRP-WRHP)
- 12mm Wedge Transponder R/O (RI-TRP-R9WK)
- 85mm Disk Transponder R/W (RI-TRP-W9UR)
- 30mm Disk Transponder R/O (RI-TRP-R9QL)
- Mount-on-Metal Transponder R/W (RI-TRP-W9VS)
- 120mm Cylindrical Transponder MPT (RI-TRP-D9TD)
- Card Transponder R/O (RI-TRP-R4FF)
- Keyring Tag R/O (RI-TRP-RFOB)
- Stick Antenna (RI-ANT-S01C)
- S2000 Reader (RI-STU-MB2A)
- Serial Data Cable
- Gender Changer
- Documentation / Demo Software CD
- Reader Accessory Kit (RI-ACC-CK01)
|
Mini kit of evaluation LF
|
Evaluation Kit to test RFID technology on frequency 134.2 KHz (Texas Instrument)
Standards: THIS and FCC
Contents:
1 - S2000 Micro Reader RI-STU-MRD1 mounted on an Interface Board with: RS232 IF Port, Power Connector, Antenna Connector
1 - 80mm Disk Antenna
1 - Set of R/O, R/W, M/P Transponders in various pakagesSet of R/O, R/W, M/P Transponders in various pakages
1 - PC Interface Cable
1 - CD with User Documentation and Demo Software
1 -Getting Started Guide
1 - 9V Power Supply Input 100V–240V, 1.5A with various main power connectors for international use |
Map site
Log in 
